Our items are produced using 3D printing technology. Due to the nature of this process, minor imperfections, surface blemishes, layer lines, or slight measurement inaccuracies may occur. These are normal characteristics of 3D printed products and are considered unavoidable.
Colour appearance may vary depending on screen settings, device display capabilities, individual colour perception, and lighting conditions used during photography.
Unless otherwise stated, all products are printed in PLA material. PLA is not heat resistant and should not be exposed to temperatures exceeding approximately 50°C. Exposure to heat may cause warping, softening, or deformation.
Products are not suitable for prolonged sun exposure in some countries, not dishwasher safe, and should not be submerged in hot water. Cleaning should be carried out gently with a soft, damp cloth only.
Unless otherwise stated, items are supplied unfinished and unpainted. Any finishing work such as sanding, priming, or painting is the responsibility of the purchaser.
Our products are intended for light use or display purposes only and should be handled with care.
Some items may contain small parts that pose a choking hazard. These products are not suitable for children under six years of age. Always keep out of reach of young children. Adult supervision is advised if any children interact with the product.
Certain products may be customisable.
Some 3D printed items may not be suitable for specific environments or applications, including prolonged heat exposure.
If you have any questions regarding product care, suitability, or customisation, please contact our customer support team prior to purchase.
We reserve the right to modify or update this disclaimer at any time. Changes will take effect immediately upon posting on our website.
